This blog is written by Lee A. Jesberger | 52 entries so far |
-
Ezee-Feed Progress #2: Patent Issued For Ezee-Feed!
Hi guys; Well, after 7 years, and considerable effort, not to mention a lot of time spent wait...
-
Routing Circles #1: Routing inlays
Hi all; Recently I needed to cut some wenge veneer to inlay into a Demilune table. The table i...
-
Ezee-Feed Progress #1: New Movie for Ezee-Feed.
Hi everyone, The latest on the Ezee-Feed front is that a short video we’ve been working ...
-
Demilune table tops #4: Crotch Mahogany Demilune Table
I finaly got the chance to get this table completed. I didn’t like the way the legs look...
-
Demilune table tops #3: Demilune Table
Another Demilune Table. This one has a crotch Mahogany Top, with solid Mahogany legs. The legs...
-
17 Foot Dining Room Table #2: Pedestals done
Hi Everyone; It’s been a while since I’ve posted anything. The table project ha...
-
Toologics and Ezee-Feed #1: Ezee-Feed Lite - featured on Toologics Website
Hi everyone; I just wanted to thank Jude Herr, also an lumberjock, or maybe it’s jockett...
-
Small Entertainment Cabinet #4: A little side tracked, again...
Well, I was out playing on the entertainment cabinet today, doing pretty well at actually getting...
-
Small Entertainment Cabinet #3: Believe it or not, it's STILL not done.
Hi Everyone; I used to think I worked pretty quickly, but now I know better. I just can’...
-
17 Foot Dining Room Table #1: Latest Commission
Hi Everyone; I just got the go ahead to build a 17 foot dining room table. This going to be ch...
-
Small Entertainment Cabinet #2: Progress Update
Hi Guys; I posted this on page one, which I guess was a mistake. I’ll update it here whe...
-
Small Entertainment Cabinet #1: Still progressing
Hi Guys; I’ve been keeping crazy hours . but I have been working on the cabinet. I figur...
-
A really tough client this time!
Well I think I met my match! My current wife, ( I”m considering trading her in), always say...
-
Masters #1: Some people, (Dennis Zongker), are just too good!
Hi everyone; I just wanted to congratulate our fellow L.J., Dennis Zongker, for having his ...
-
BIrds Eye Table Construction #1: Making the Bids Eye Dinning Rm. Table
Hi Everyone, Apparently the dining room table came up in the rotation, because a few comments ...
-
Shop Safety #3: Caution, Very Graphic Video
Hi Everyone; First please note, I’m not trying to beat a dead horse here, however I am t...
-
Advice on Patents #1: Okay, it's not woodworking, but it's for woodworker's too.
Hi all; As woodworkers, I would say we are a pretty creative group. I doubt any us us have not...
-
Shop Safety #2: Hand Tools, Dangerous?
Hello again everyone; You guys and gals must be starting to think I like writing. Well I don...
-
Shop Safety #1: Regarding Karson's Kickback Survey
Hi All; I thought I would pass on HOW my kickback occurred, so everyone might keep this is min...
-
Homemade Tools #3: Attaching the leather
Hi All, A question I received on attaching the leather to the face of the mallets. I though...
-
Elevator Door? #1: Cherry Door
Hi All; Recently a client wanted a door made for his condo. The strange part of that was the f...
-
Shop Featured on Delta |PorterCable #2: Project of the Month
Hi All; New Email from Delta. The Home Office Project photos that I submitted have been added ...
-
Shop Featured on Delta |PorterCable #1: Shop of the Month
Hi All; Apparently I joined an Owners Club on Delta’s website some time ago. I got an...
-
One year already? #1: Man, I'm getting old.
I just noticed today is one year since I joined LJ’s. Time really flies. I thought I was...
-
Homemade Tools #2: Wooden Dead Blow Mallets
I saw an article in a woodworking magazine, maybe it was shop notes, on making wooden mallets tha...
-
Demilune table tops #2: Scalloped Front Demilune
I started a new Style demilune table some time ago, but keep getting side tracked. A.D.D., I thin...
-
Router Table #1: A router table for use with Incra Accessoriess
I guess about ten years ago I made a second router table for certain applications. Mostly it was ...
-
Router Table Fence #1: It's not pretty but...
About twenty some years ago I bought a professional door making router bit set made by Freud. Inc...
-
Marquetry #1: An age old craft
Hi all; After reading Douglas’s blog on marquetry I figured I would add a few comments a...
-
Techniques #1: Gluing a mitered leg or post
In response to Dave in Texas’s question on a mitered joint, I thought I’d show an eas...
-
Custom Floor #1: Driving myself crazy
We did a floor a few years ago for my sister in law. She has expensive taste, and wanted a flo...
-
Veneering #3: Bath Vanity
Here’s a bathroom vanity we made for a client a number of years ago. I never got back there...
-
Custom Desk #1: Curved Dovetailed Drawers
Willie asked yesterday if I could explain how I make dovetails on curved drawers. I may have j...
-
Fine Woodworking does ezee-feed review #2: Ezee-Feed Gone Wild?
Hi everyone; Since a lot of LJ’s have been following the progress of my ezee-feed projec...
-
Fireplace Mantle #1: Fireplace upgrade
When my step daughter wanted to upgrade the fireplace mantle in her family room, we worked from a...
-
Fine Woodworking does ezee-feed review #1: Finally some exposure
I just got this notice from notice from Roger Strautman!! From: Roger StrautmanSubject: Ezee-f...
-
Burls #1: Burl the size of a car
Karson and I were talking on the phone the other night, the topic being burls. He poste...
-
Conference table / work bench #2: Construction Details
I thought I would include a few more photos, showing the construction details. I’m not s...
-
Conference table / work bench #1: Wenge and White Ash Table
It’s been a while since I posted any projects, so I figured I’d better ...
-
General Posts - non woodworking #1: You are special
Something my sister emailed to me, and I thought it was worth passing on to my friends!. Somet...
-
Proud of my Buddy #1: First attempt at carving
Hi all; I always mention my buddy Bruce, and here’s a post dedicated to him, (even...
-
Homemade Tools #1: Block plane and Joiner Plane
Just playing around in the shop and came accross these planes. I made them a couple years ago, an...
-
Not a woodworking project, But interesting
Not a woodworking project, but interesting, I think. I made jigs for these also. One...
-
Jigs #2: Multi Position Jigs
Making better use of you time includes making jigs that can be used in different ways, or positio...
-
Jigs #1: Templates and Jigs
Templates and Jigs Whenever we do a project that has the potential to be built again, or...
-
Veneering #2: Flattening Veneers
When using some veneers, they must be flattened prior to use. This is especially true of ...
-
Demilune table tops #1: Making Demilune Tables
As you may have guessed, I make many of these tables. The practice is needed, and ...
-
Vacuum series #1: Plexiglass Jigs
I was thinking whether or not to make this a continuation of the veneering bog, however...
-
Veneering #1: A Primer Course
Veneering, a Primer Course The top photo is a couple sample packs of sequenced matched vene...
-
Our Shop #1: Basic Layout
When designing the shop I tried to anticipate the type of work we would be doing. Look...
-
Living Room and Bar Project #1: #1
Some additional photos of the Living room and bar project Photo one shows the matching ...
-
Fine Woodworking & Ezee-Feed Review #1: Fine woodworking Mag Review of Ezee-Feed #1
Hey guys; I got an email from Fine Woodworking Mag today, requesting one of my infeed and an o...