LumberJocks

Wood Gears

  • Advertise with us
Blog series by Lazyman updated 08-02-2015 10:47 PM 1 part 7674 reads 1 comment total

Part 1: Experiment Making Wood Bevel Gears

08-02-2015 10:47 PM by Lazyman | 1 comment »

After seeing Matthias Wandel’s video about making wood pseudo bevel gears that will will run at right angles, I decided to attempt making a true bevel gear or at least a closer approximation. My idea was to cut a 45 degree angle on the edge of the wood disc and then cut the teeth on the band saw with the disc tilted at a 45 degree angle. Here are the steps I used to cut it on my band saw and the results. This was just a prototype but I think that I might try using this to make a ro...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com