LumberJocks

steaming

  • Advertise with us
Blog series by Lazy_K updated 11-07-2014 07:36 PM 2 parts 4995 reads 20 comments total

Part 1: Finally get around to doing some steam bending

09-29-2014 08:34 PM by Lazy_K | 16 comments »

Hi all;So I’ve finally gotten around to doing some of the steam bending of chair parts that I mentioned I was going to do with that log. my set up is fairly simple: propane tank, burner + stand from a turkey deep fryer, an old 5 gal can to boil the water in and a length of pvc pipe for the steam box. then you need a bending form of some sort with removable pegs and wedges to lock the bent part in place while it cools. the pvc is supported on my saw buck w...

Read this entry »


Part 2: Handles for bending strap

11-07-2014 07:36 PM by Lazy_K | 4 comments »

well I searched my garage for material appropriate to make handles/ends for my new steam bending strap. (re: Lee Valley)I was looking for a piece of 2×2 that was dark and possibly luan that I remember having. couldn’t find. then I looked through all of the stuff that I did have handy… beech, could be chair parts, osage, don’t want to waste it on something that’ll be left outside….spf .. to soft, oak (red or white) chair parts again. then I bumped into these....

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com