Haven’t been on Lumberjocks in a while due to some family issues. I’m at the age where me and my family develop health problems more frequently. I’m also at the age where I can’t carry sheets of 3/4 inch cabinet grade plywood like I used to. I looked on line for a dolly that would help me but they were expensive and didn’t fit my needs. I have a small shop in my basement, no driveway. Plywood has to be unloaded on the street go between two houses to my back entrance and then through narrow doors into my shop. Rough pavement and sidewalks and narrow doors, I have lots of obstacles. My only options were to have the place where I bought the plywood break it down for me or to break it down myself on my street. This is where my dolly comes in. I built this contraption and thought I would share it with you all. If you live close to Frackville, PA you are welcome to borrow it. I don’t use it too often but it comes in handy when I need it.
Plywood comes off the dolly at the exact height of my table saw. I can also put some 1×3 lumber underneath the plywood and work with the plywood right on the dolly.
-- K. Stone “Tell me and I forget, teach me and I may remember, involve me and I learn.” ― Benjamin Franklin
4 comments so far
FreddieMac
home | projects | blog
167 posts in 1358 days
#1 posted 06-22-2017 06:41 PM
Now that is pretty darn cool! Great work around…
edapp
home | projects | blog
347 posts in 2440 days
#2 posted 06-22-2017 07:48 PM
WOW! That’s fantastic! And it gets better with each picture!
GR8HUNTER
home | projects | blog
8310 posts in 1723 days
#3 posted 06-22-2017 09:45 PM
where there is a WILL …..there is a WAY …...GREAT JOB :<))
-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN :<))
Gilley23
home | projects | blog
489 posts in 1392 days
#4 posted 06-23-2017 12:53 AM
That’s pretty dang awesome!
Have your say...