LumberJocks

KWDRIVER's Favorites

  • Advertise with us
View SPHinTampa's profile

Japanese style lamp #1: Getting Started

05-10-2013 10:34 PM by SPHinTampa | 6 comments »

Decided to make lamps for Christmas for my mother in law. Found a very cool book on japanese lamps so decided to take a crack at it: Key Steps in process:1. Prep plans and Mill stock (not shown)2. Cut and Route legs3. Cut, Route and Rip kumiko (rails and styles)4. Cut and route top5. Test fit sides6. Glue up side panels, legs and lid7. Add light socket8. Light up! Step 1 – Mill StockStarted out with book, shoiji paper and reclaimed wood from a prior project. Instru...

Read this entry »


View McLeanVA's profile

Cutting Board: How To's #1: Zig Zag Cutting Board - How To:

10-04-2010 11:38 PM by McLeanVA | 68 comments »

For those of you who asked me for a tutorial on how to make the zig zag legless vegetable death table (cutting board), here is my best shot. I am far too impatient to take photos when I work, so I decided to illustrate the process using some good old Adobe PhotoShop. I hope you find this useful and informative. I will outline the process in 10 steps below. I have assumed that when viewing these steps that basic woodworking skills are familiar to you. If you have questions, or run into snag...

Read this entry »


View ganders's profile

The quick and dirty instructions on how to make a zig-zag pattern cutting board.

08-06-2008 12:26 PM by ganders | 26 comments »

The quick and dirty instructions on how to make a zig-zag pattern cutting board. Click on the pictures to see a full size image. Choose a couple different types of hardwood. The more colors the better. Below is cherry, maple and walnut. Rip strips of wood any width so the total with is about 12”. This is the width that will fit through my planer. The beauty of this is that none of the widths have to be the same. The board shown below is made of scrape wood. If you only have shor...

Read this entry »


View SPalm's profile

Double Tumble Cutting Board

05-31-2011 03:11 AM by SPalm | 41 comments »

Or maybe I should call it Two and a Half Steps. Anyway, I cannot believe that I am building another one of these, but heck, they are so much fun. This is a continuing saga of endgrain geometric boards using three contrasting woods. A light color, medium color, and dark wood selection are jointed and planed to the same thickness. I started by tilting the blade to 60 degrees and ripping an edge on all three boards. I then moved the blade over about an inch and ripped again creating a sma...

Read this entry »


View scopemonkey's profile

Trestle Table for Dining Room #6: Base Dry Fit

06-28-2010 08:06 AM by scopemonkey | 3 comments »

Ok, so it has been a while since I posted an entry. The top is finished and now stored letting the polyurethane cure a bit before I do the final rub out and wax. I have since turned my attention to the base. The hardest part was making the cross beam. I laminated a piece of walnut between two pieces of VG fir. Once the glue dried, I resawed it in half and cut the mortises for the pegs from the inside using my router and a jig cut at 5 degrees. I then re-glued the two halves together a...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com