LumberJocks

Thin rings bowl with black veneer.

  • Advertise with us
Blog series by Julian updated 02-19-2017 11:36 PM 3 parts 2981 reads 5 comments total

Part 1: 14 thin rings glued & turned.

02-06-2017 04:25 PM by Julian | 2 comments »

This will be a covered bowl. I first made the bowl and then will make the cover to ensure it fits.This bowl has two different types of rings; one type of ring is from alder and walnut & the second type of ring is from cherry and maple. The smaller pieces from maple and walnut are wider in the rings as they approach the center but the effect did not turn out that obvious. There is a layer of black veneer between each ring.Here are some photos from glued rings to finished turning (before...

Read this entry »


Part 2: Sealed with shellac

02-07-2017 10:16 PM by Julian | 1 comment »

After sanding to 220 grit I applied a coat of clear shellac as a sealer.I’m hoping the cherry will darken more to give the piece better contrast.

Read this entry »


Part 3: Rings for the lid

02-19-2017 11:36 PM by Julian | 2 comments »

It’s been at least 2 weeks since I worked on this project. These are the rings that will make up the lid.

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com