LumberJocks

Articulated Hollowing jig

  • Advertise with us
Blog series by Julian updated 11-25-2016 12:06 AM 1 part 1392 reads 5 comments total

Part 1: Homemade hollowing jig

11-25-2016 12:06 AM by Julian | 5 comments »

I wanted to make a hollowing jig similar to some that are commercially available. I made mine mostly from aluminum. A couple parts are steel. I had some of the parts such as the 3/4” vertical shaft, the bottom base that holds the vertical shaft, and the 2 collars. I did have to purchase the aluminum, set screws, dowel pins, and thrust washers. The articulated hollowing jig cost me less than $60. The boring bar is 3/4” steel with a HSS cutter that I sharpened. The boring ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com