The “boventafelment” is also anchored on the beams with 4 metal anchors. On the drawing these are placed on the outside. But I want to be able to take the cladding off to show the inside. So I will change the layout and put the anchors on the inside
Starting off with some spokes out of a old bicycle
Some heat to bend the steel
The finished hooks are placed alongside the beams
They are placed in a recess so the pancake can sit flush
Drilling nail holes into the anchors
Drilling and nailing (with 0,8×10 mm) the anchor
The end result
-- Job, The worst wheel always creaks the most
3 comments so far
sras
home | projects | blog
6516 posts in 4464 days
#1 posted 11-16-2020 12:56 AM
I’m really enjoying watching this build.
-- Steve - Impatience is Expensive
htl
home | projects | blog
5616 posts in 2494 days
#2 posted 11-16-2020 10:04 PM
Beautiful work and just love the progress pictures.
-- An Index Of My Model making Blogs https://www.lumberjocks.com/htl/blog/130264
Dutchy
home | projects | blog
4292 posts in 3503 days
#3 posted 11-29-2020 11:22 AM
I also like it Job, but are you still able to cycle?
-- https://dutchypatterns.com/
Have your say...