JobK's Blog

  • Advertise with us
This blog is written by JobK | 12 entries so far

Latest Entry

Spinnekop (windmill) #12: Ankers

11-15-2020 06:55 PM by JobK | 2 comments »

The “boventafelment” is also anchored on the beams with 4 metal anchors. On the drawing these are placed on the outside. But I want to be able to take the cladding off to show the inside. So I will change the layout and put the anchors on the inside Starting off with some spokes out of a old bicycle Some heat to bend the steel The finished hooks are placed alongside the beams They are placed in a recess so the pancake can sit flush Drilling nail holes into the anchors Drilling and nailing (with 0,8×10 mm) the anchor The end result

Read this entry »

Older Entries

View all 12 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics