LumberJocks

Shop stuff #170: Some drawers for the vanity.

  • Advertise with us
Blog entry by JimDaddyO posted 09-08-2019 12:50 PM 561 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 169: Mobile Home Skirting My Way Part 170 of Shop stuff series no next part

One of those projects that got put to the side while other things were going on. The bathroom renovation I started last year is still not complete, but every now and then I get a bit of time to do a bit more on it. Earlier this summer I found a few days to get the drawers done for the vanity build. I milled up the wood from maple for the sides, used plywood for the bottom, and of course, used cedar for the fronts to go with the cedar cabinet. I also cut the centre panel from the same board of cedar so it is continuous grain. Not that there is much in the way of telling, but never the less, it’s how I wanted it. I left the sides longer than the drawer opening so when you pulled it out you would stop before it, and it’s contents, fell on your feet.


View on YouTube

-- my blog: http://watertoneworkshop.blogspot.ca/ my You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA?view_as=subscriber



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com