New Directions

  • Advertise with us
Blog series by JeremyPringle updated 01-25-2015 01:38 AM 4 parts 22073 reads 20 comments total

Part 1: More than just a saw..

11-04-2014 02:29 AM by JeremyPringle | 7 comments »

So once again it has been a while since I had enough time to sit down and type something. Things have been.. well.. a little crazy. Since my last update, I was in process of selling my table saw.. Its gone…. and my shop is a little bare.. But that’s ok, I have no projects on the go and don’t have time restrictions on any of them… so I decided to start doing some shop modifications and the first was to hang this little drawer thing above my lathe… which I ...

Read this entry »

Part 2: Progress and curly cherry

01-03-2015 10:09 PM by JeremyPringle | 3 comments »

Its been a while.. again. Busy, busy, busy. The new job is keeping me… well… busy. So busy.. that I have spent very little time in my shop. But.. over the holidays I did get some time, and with that I am working on another article, so unfortunately, I cannot share any more details on that until it gets published. I am almost done that build, and when I am, I am going to jump into a new blog series while I build a lowboy.. or 2. This is a bucket list project for me, and si...

Read this entry »

Part 3: New (old) TOOLS!!!!!

01-15-2015 03:59 AM by JeremyPringle | 6 comments »

New direction in life… new outlook on life… new projects to build… so why not some new tools? In the end of all this, my hope is to be 100% hand tool. I still occasionally use a router table because I don’t have decent moulding planes or a full set of hollows and rounds yet….. yet..... I was able to pull some strings and with a little begging to certain people that I know and hold in high regard (who will remain a secret) I was able to get my hands on some...

Read this entry »

Part 4: Stash.. or hoard?

01-25-2015 01:38 AM by JeremyPringle | 4 comments »

With my new direction.. come trying to clean up and reorganize my shop/basement/marquetry studio. I have also decided that about 50% of the stuff in my house… does not need to be here. Since selling off the last of the power tools (cabinet saw) I am a large amount of space in the middle of the shop… waiting for some to put there. Mostly I have my saw bench set there…. with a ton of stuff sitting on top of it. Anyways… I decided to get underway and just do it, and...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics