Walnut display case

  • Advertise with us
Blog series by JeremyPringle updated 06-19-2013 09:00 PM 2 parts 3631 reads 6 comments total

Part 1: Jointing and planing, and planing, and planing, and planing....

05-27-2013 03:40 AM by JeremyPringle | 2 comments »

This past week I got started on another job, a display case and table for a local business. A really, really cool shop that sells crazy high end Japanese knives. Jumping right into it, I glued up two pre-laminated pine boards for the table top, I am going to paint it black, so the grain is not an issue. (not pictured, really nothing to see) But the legs for the table are something else. They are thick with a pretty big rounded edge, so I started with a 8/4 poplar board, 7 1/2” w...

Read this entry »

Part 2: All done, time for a nap... and to clean the shop

06-19-2013 09:00 PM by JeremyPringle | 4 comments »

The past 3 weeks have been crazy. Aside from my full time day job, kids baseball 5 nights a week, I actually had very little time to work on this case, BUT it had to be done. Because I was in such a scramble to get it done, I forgot to take pictures of most of the process. Without pictures there really is not much to write about. But there were some really interesting things that I did take pictures of. One… I had a really cool idea and contacted Paul ‘Shipwright’ and...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics