Jake Brain's Blog

  • Advertise with us
This blog is written by Jake Brain | 2 entries so far

Latest Entry


03-05-2012 12:34 AM by Jake Brain | 4 comments »

After seeing a number of setups and procedures on the web that are used to set jointer knives. I thought that the best methods were the one that used a dial indicator. I designed a setup using two precision 1-2-3 blocks and two dial indictors. These precision 1-2-3 blocks are ground and cases hardened and are used in precision machine setup and precision measurements. The blocks are 1” by 2” by 3”. They are parallel within 0.0002”, flat within 0.0002” and square within 0.0002” they are also case hardened. The 1-2-3 blocks that I was looking for were the perforated ones having both tapped and plain holes. These blocks have 23 holes through them, 5 of the...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics