JSMorgan's Forum Topics

  • Advertise with us
View JSMorgan's:homeworkshopprojects (0)blog (1)reviews (0)forum topics (5)buddies (0)favorites (0)activity logWatch
12-04-2018 01:14 AM

Laguna Jointer Rest Switch - 6 replies

I was using my Laguna 8” helica cutter head jointer. All of a sudden it stopped. I contacted Laguna and they said to look for a reset switch which may have popped. I either did not find it or it had not popped. Anyone know where it is located? Thanks,Jerry

11-02-2017 07:45 PM


I purchased the Shelix Cutter head for my DW 735 planner. I had a Dewalt Service Center install it and just picked it up. I believe there were 2 things that should be noted. First, installing the new cutter head voids the warranty. Second, there is not a “stop” on the motor if something gets stuck. If you have to remove the top to ge...

10-09-2017 03:49 PM

Try Again or Trash It? - 30 replies

Good Morning! I am at my wits end on finishing the table legs and aprons. Let me start from the beginning: 1. I sanded everything to 180. 2. I applied 2 coats of General Finishes Dye. 3. I then applied 2 coats of GF Black Stain. 4.I then applied a coat of Shellac. 5. I then applied 2 coats of GF Gel Stain. Sanding all between coats. From the tim...

09-28-2017 03:06 PM

Attaching Aprons To Legs - 17 replies

I am building a dining room table. It is your basic 4 legs and a top. My question is, I’ve used domino’s for attaching the aprons to the legs. One domino per leg/apron. Will this be strong enough? Won’t most of the weight be on the legs themselves? It’s too late to add another domino but I could, and I hate to do it, add...

09-05-2017 01:17 AM

Spraying Dye Stain - 6 replies

I am working on a dining room table and have some issues and would like some help. 1. The wood is cherry (but looks like it may be “curly cherry) as there are “rings” going all the way through the wood. I could tell those rings would pop out under a top coat so I used CN’s blotch control. This helped with blotching. 2. I...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics