This blog is written by JLay | 13 entries so far |
-
Tool Box #6: Door assembly
I finished all of my poly and stain work and sanded the inside of the box itself. It was time to ...
-
Tool Box #5: Stain and poly
I sanded the living crap out of this project and then proceeded to gently caress stain all over t...
-
Tool Box #4: Doors
I had the pieces made for the doors. Next I had to get plywood for the center of the doors. I cut...
-
Tool Box #3: Panel door
I started to make my doors for the tool box. First I made rough cuts on 8 pieces of wood to accou...
-
Tool Box #2: Inside Assembly
Now that the frame is fully assembled, it was time for me to decide how to assemble the inside of...
-
Tool Box #1: Tool box 1
So far I’ve been working on a toolbox. Since the blog is just now being started , I’m...
-
Reflection
The time I spent on this project vs the difficulty was decent. Because of complications, there wa...
-
Coffee table progress
This is my coffee table progress. I have to still make the drawers and stain it. Also I am going ...
-
Coffee Table #5: Coffee table #5
As I said previously, all of the pieces are cut. The assembly of the table without the drawers is...
-
Coffee Table #4: Coffee table #4
Now that all of these pieces are cut I moved into doing the assemble of the table itself. The fir...
-
Coffee Table #3: Coffee table #3
Now that my mortise cuts were made, it was time to start making specific cuts in the table saw to...
-
Coffee Table #2: Coffee table #2
Once I made the pieces for the frame , it was time to start making different cuts. Mortise and te...
-
Coffee Table #1: Coffee Table Part 1
I am making a coffee table and so far I got my pieces for the base if the table. Basic techniques...