Tool Box #4: Doors

  • Advertise with us
Blog entry by JLay posted 04-29-2016 07:07 PM 1086 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 3: Panel door Part 4 of Tool Box series Part 5: Stain and poly »

I had the pieces made for the doors. Next I had to get plywood for the center of the doors. I cut the plywood to the correct dimensions and made sure that it was a good fit. Next I decided to stain the outsides of the door. When they get three coats of stain I will assemble the doors and glue them, adding on my poly to the whole door.

1 comment so far

View Tooch's profile


2016 posts in 2994 days

#1 posted 05-02-2016 09:37 AM

JLAY – Remember you should only need to Stain the wood ONCE, and then apply 3 coats of Poly.

you should not stain the wood 3 times.

-- "Well, the world needs ditch-diggers too..." - Judge Smails

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics