LumberJocks

Router Table Re-do

  • Advertise with us
Blog series by HuckD updated 11-27-2013 01:40 AM 4 parts 37298 reads 6 comments total

Part 1: The Fence

11-03-2013 12:51 AM by HuckD | 2 comments »

This was supposed to be part #2 but it’s #1. See #2 for the back story on my router table. The first improvement to my router table was the fence. I have a bunch of mdf that’s been in the shop for years so that’s what I used. I know, not the best material for a project like this. But, my fence was a hodgepodge of ideas and I built it with no plans and just guessed at the measurements. IF it doesn’t hold up at least I’ll have a better idea of what I’...

Read this entry »


Part 2: What I've been using

11-02-2013 11:31 PM by HuckD | 0 comments »

Dang, I have parts 1 and 2 reversed in the blog. Sorry, but this was my first time trying to use the blog. I’ve been cleaning, reorganizing and rearranging my shop lately. The latest task has been to update my router table. I thought I’d start this blog with what I’ve been using. This was built approximately 9 years ago and has served reasonably well. I had acquired several metal cabinets from a copy machine company and started with one of those. I mounted it ...

Read this entry »


Part 3: The Router Lift

11-23-2013 10:52 PM by HuckD | 2 comments »

The router lift is finished. I used plans from John Heisz and they are just superb. The plans include detail drawings with dimensions for each part, good explanations for the assembly and a Sketchup file that allows you to explore the design and see how everything works together. The completed lift works very smoothly – I can’t wait to put it to use. First, some pictures of the lift before installation. It’s just sitting on top of my current router table. ...

Read this entry »


Part 4: The Table Top

11-27-2013 01:40 AM by HuckD | 2 comments »

Well, the rain today halted construction of my storage shed so I had time in the shop to make the top for the router table. It couldn’t be much simpler: two thicknesses of 1/2” plywood. They were cut larger than the cabinet base so that I have room to clamp around the edge. I rough cut a rectangular hole in one piece. Then I pinned 4 pieces of scrap to the top around the hole to make a pattern, then used a handheld router with a guide bushing finish cut the rectangle. Afte...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com