| Blog series by Holbs | updated 06-10-2014 05:23 AM | 1 part | 2415 reads | 2 comments total |
Part 1: rough assembly
This router mortise jig is finally coming around to looking like a working jig. It’s a swiss army knife of mortise jigs: 45 degree ledge, a 90 degree horizontal ledge that can travel 4” up and down, and can slide 4” left or right to make room for 90 degree vertical pieces. Still working out a middle vertical 16”x2” bar of wood for clamping, still gotta put stops in on the rear T-track, and still more to do. This was my first time working with hardwood (scraps...
