LumberJocks

Holbs's Blog

  • Advertise with us
This blog is written by Holbs | 186 entries so far

Latest Entry

Roubo Workbench #5: Flattening the tops, mostly.

03-11-2019 01:03 AM by Holbs | 5 comments »

Started with my #5 1/2 to get the glue off and do a rough flattening of the top. Will fine tune flatness upon sitting on base structure. Quickly realized, going way too slow. Out comes #40 scrub plane. Much much faster! Finished with #7. Took roughly 3-4 hours using #5 1/2. When I swapped to scrub, took an hour. Lessons learned.This leaves me with 4 1/8” or maybe 4 1/16” thick of both slabs.

Read this entry »

Older Entries

View all 186 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com