Walnut Nightstand #8: Legs, skirts and corner blocks installed.

  • Advertise with us
Blog entry by HappyHowie posted 06-03-2016 01:39 PM 1515 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 7: Remade the Nightstands Drawer Box Part 8 of Walnut Nightstand series Part 9: Ready for Wax? »

I am attaching the legs as shown in the photo. After all four legs are on then I will attach the skirts connecting the legs. Pocket screws again will be used.

The position of the skirts will cover the pocket holes on the sides of the legs.

Then I will be able to measure the final lengths of the corner brackets. I have yet to determine where I will drill pocket holes to fasten the corner brackets. The corner brackets will cover the pocket holes drilled in the skirts. I doubt I will be able to cover the pocket holes I drilled in the corner brackets. However, I do have walnut pocket hole plugs that can fill those pockets.

I believe the legs and skirts are firmly fastened so I did not drill pocket holes in the corner blocks.

-- --- Happy Howie

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics