Serving Tray

  • Advertise with us
Blog series by GrandpaAndrew updated 09-20-2012 12:12 AM 2 parts 6749 reads 0 comments total

Part 1: Ready for the sides

09-17-2012 04:43 AM by GrandpaAndrew | 0 comments »

Now that I’ve finished a few other projects and the doctor has cleared me to start working again, I am back on my serving tray project. I finished sanding two marquetry pieces I made a few months ago and put a seal coat of shellac on the pieces. The next step is working on the side pieces. Today I did some trimming of the side pieces on the table saw and tomorrow I need to set the router table to refine the rabbets for the bottom pieces. Here is a picture of one of the bottom pi...

Read this entry »

Part 2: milled the sides

09-20-2012 12:12 AM by GrandpaAndrew | 0 comments »

I set up the router table this afternoon and cut the rabbets for the tray sides. Next I have to cut the bottoms to size. No pictures today. Next time.

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics