Tools/Shop/Projects etc. (General Blog)

  • Advertise with us
Blog series by GlennsGrandson updated 09-21-2012 07:33 PM 2 parts 5898 reads 11 comments total

Part 1: Zero Clearance on a cheap table saw

09-16-2012 04:59 PM by GlennsGrandson | 8 comments »

So I have a cheap, older, table saw. Skilsaw brand. With no intention of upgrading due to space and of course budget.I had made a zero clearance insert for it awhile back… out of plexi-glass which was maybe not the best choice.This insert that I made worked very well but it was a pain to make. During a recent incident in the shop that had to do with a push stick, ripping some thin stock, and a little kickback I no longer have my homemade insert (I always wear my safety goggles). I we...

Read this entry »

Part 2: Removed

09-21-2012 07:33 PM by GlennsGrandson | 3 comments »


Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics