Drill/Driver Hanging Station (possible charging station)

  • Advertise with us
Blog entry by GlassImpressions posted 03-13-2015 01:07 PM 2007 reads 0 times favorited 1 comment Add to Favorites Watch

Drill/Driver Hanging Station

I filmed the build on my YouTube Channel. Please check it out!

My old unit served me well, but I could incorporate some storage and increase the quality a little bit.

The build consists of MDF, 3” PVC Pipe, Glue, Pocket screws, paint.

Primary construction method was butt joints with glue, and pocket screws to hold the cabinet in place. You could easily incorporate a battery charger and make it an all in one storgae/charging station.

If you have any more comments, questions or suggestions please leave them here or on YouTube.

-- Glass Impressions. Please check out my YouTube Channel!

1 comment so far

View Roger's profile


21051 posts in 3814 days

#1 posted 03-14-2015 11:49 PM

That’s way cool way to have those all right there. A nicely done set of “holsters”. I do like that portable spray booth as well. Very good idea, especially with the box fan and filter and the turntable. Good thinkin

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics