LumberJocks

Working the wood

  • Advertise with us
Blog series by Gkolterman21 updated 01-31-2020 02:41 PM 2 parts 560 reads 0 comments total

Part 1: Shop Project-American flag cabinet

12-17-2019 02:37 PM by Gkolterman21 | 0 comments »

I decided that I wanted to make an American flag cabinet. I wanted to build this because I needed something to put my ammunition in for all my different types of Calibers. The project isn’t too complicating but there were some things I had to overcome and problem solve. I used poplar wood as my main box and shelves for the ply wood i used it was all birch plywood. First, I started off with making the box This was very easy and I used a pocket hole joint to put it toge...

Read this entry »


Part 2: American flag cabinet

01-31-2020 02:41 PM by Gkolterman21 | 0 comments »

I am still working on my American flag cabinet the progress has been slow. The first thing hi have done since last time was to figure out where I needed to cut the metal part of my American flag. The first picture will be the top and the second picture will be the bottom. You probably noticed that they were different sizes since the halfway point was in a bad spot I decided to cut it as close to the right length. I did this so that in the end I will have more stability in the doors. The n...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com