LumberJocks

Working the wood #1: Shop Project-American flag cabinet

  • Advertise with us
Blog entry by Gkolterman21 posted 12-17-2019 02:37 PM 315 reads 0 times favorited 0 comments Add to Favorites Watch
no previous part Part 1 of Working the wood series Part 2: American flag cabinet »

I decided that I wanted to make an American flag cabinet. I wanted to build this because I needed something to put my ammunition in for all my different types of Calibers. The project isn’t too complicating but there were some things I had to overcome and problem solve. I used poplar wood as my main box and shelves for the ply wood i used it was all birch plywood.

First, I started off with making the box

This was very easy and I used a pocket hole joint to put it together. The next step was putting on the shelves I used a pocket hole joint for this too it turned out amazing.

The picture above was the back of the cabinet I used 3/8 inch plywood and routed around the edge of the box so that the plywood would sit flush with the rest of the box. Next, I got my metal cut and designed what I wanted it to be.

The next step was putting in the wood behind the American flag outline.

I am almost completed with the project all I have left to do is cut the metal and plywood backing in half so that I can have two hinged doors then i will have to put the hinges on and put it all together i will complete this very soon



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com