Gingzillaman's Blog

  • Advertise with us
This blog is written by Gingzillaman | 4 entries so far

Latest Entry

Tablesaw Workstation #3: The base is rolling!

04-22-2017 05:33 PM by Gingzillaman | 0 comments »

This past week I have been able achieve a little progress on the table tablesaw workstation. I now have a rolling base that is ready for cabinets. The base is welded up from “C” channel that I had left over from another project. My father was nice enough to weld me up the frame 2 weeks ago and bring it to a meeting point half way between us. This is going to be a beefy base but at least it will withstand just about anything that gets thrown at it like moving and the usual shop wear and tear. I laid out the casters to stagger the joint to ensure strength. The holes for the wood fillers were drilled and countersunk to make sure a smooth surface on the bottom of the base. You ...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics