LumberJocks

Garbanzolasvegas's Forum Topics

  • Advertise with us
View Garbanzolasvegas's:homeworkshopprojects (3)blog (0)reviews (0)forum topics (47)buddies (1)favorites (0)activity logWatch
02-20-2015 03:24 AM

Kreg jig and plugs??? - 25 replies

Okay I have been kicking around the kreg jig and learning about it. One thing I have learned is clamp n and clamp it good I have tried to hide the screw pockets as much as I can but in one situation I have to hide the pockets. HOW DOES ONE DRIVE the kreg jig PLUGS into the holes???!

02-16-2015 04:12 PM

Sloppy...Glass and Rifles - 1 reply

I made my first router table insert for my table saw. I Routed out the space for the router plate and got a little sloppy. Too much space. My dad use to GLASS LINE Rifle stocks and I think thats would be perfect to make my router table insert fit tight as a drum. Any other suggestions

02-13-2015 11:07 PM

Grizzly G0555 Bandsaw - 2 replies

I have a new G0555 and love it but I have some issues maybe someone could help me with. 1) When setting the thing up for/with a 1/8 inch blade, its seem impossible to get the blade to stay in the crown of the wheel tire. Once it seems set, it wants t run to the back or the front of the wheel. 2) The lower guides are almost impossible to ad...

02-13-2015 10:33 PM

White Wood??? - 33 replies

I went to Menards the other day and they had 4×4 lumber and the label called it “WHITE WOOD!!!!!” No one could tell me WHAT Specific TREE/WOOD this WHITE WOOD halls from. Cal anyone tell me. I used it on my Rustic Kitchen Island and it does not match my PINE parts. But I did have some fun telling one of the people worki...

02-13-2015 08:14 PM

Hickory Heart - 8 replies

I made a little V-Day gift for my Primary Girlfriend.. The heart is made of hickory. It was the ONLY hard wood I could find within 100 miles than had any Personality to it at all. I would of rather use Zebra wood or rosewood or something like that.

02-13-2015 07:37 PM

Rustic Mobile Kitchen Island - 2 replies

My new Rustic kitchen islands DONE! an working for me now!

02-13-2015 01:12 PM

Biscuit Joiner - 29 replies

I am in the market for a biscuit joiner. I love deWalt stuff but am very disappointed by what I have read about the DeWalt BJ. Seems my money would be better spent on of all things a Porter cable BJ. Many of the complaints about the DeWalt DJ is that the motor cooling air exits right in your face and that the Front handle it attached to t...

02-13-2015 04:47 AM

Watco Danish Oil - 12 replies

I have never been any kind of expert on wood finishing. BUT! I did a lot of research and stuff and found Watco Danish oil. I may ask it to marry me! Using it now! Seems to be fool proof

02-11-2015 04:04 AM

Not a review... But that's coming - 0 replies

I bought this DeWalt 618 router KIT from amazon early summer and have not had an opportunity to use it much until now http://www.amazon.com/gp/product/B0000CCXU3/ref=oh_aui_detailpage_o08_s01?ie=UTF8&psc=1 I have not been much of a router man but have use many in the past… This one is different. The “D” handle is m...

02-09-2015 09:00 AM

Wood working injuries - 62 replies

I have seen some awful images of injuries germane to woodworking. Table saws, Band saws, Drill presses and the like… But the most awful injury I ever did to myself was with a chisel. No moving parts… No motor….. KNOCK WOOD!

02-09-2015 08:27 AM

Never a prettier sight.... - 2 replies

Minus the headless hookers bodies of course…..

02-09-2015 12:52 AM

DUST - 1 reply

IS it just me or am I getting use to sleeping in a bed filled with saw dust….....

02-08-2015 04:25 PM

Cant bring myself to do it..... - 26 replies

I am getting towards the end of my latest project. A mobile rustic kitchen pine island. Casters not on yet. BUT I want it to looked Rustic and worn and maybe weathered. But after screwing it all together I cant make myself submit it to the (FLOGGING) beating it with CHAIN and hammer and eye gouger poker stick thingy to get that worn look....

02-06-2015 01:27 PM

Damned if you do and damned if you don't WTF!!!! - 43 replies

So my latest project something just wasn’t working out. Some thing aint right! I thought it might be my miter gauge. NO! Then thought it might be my rip fence… NO! It was my damn “LOWES” SQUARE! THE S.O.B! isn’t SQUARE! I mean WTF!!!!! Has the world gone completely and totally insane! Is nothing RIGHT! Does no...

02-06-2015 03:28 AM

Rethinking.... - 4 replies

I am in the middle of a build… I need a mobile kitchen island. Hard to explain why, I just do. I want a rustic pine piece of work. I found one online I am emulating mine to be like.. SEE image Mine is pretty much coming together like the one here, but a little more refined.. For one I am going to use modern drawer slides for the u...

02-06-2015 03:18 AM

Router Table with router???? - 10 replies

Is it just me or does it seem a good router table costs MORE than a good router? WTF? Then yesterday at Lowes they have a bench top Router table for like $129 bucks… WITH A ROUTER!!! I don’t recall the brand, but it all looked solid. Accessories for any good tool should not be more expensive than said [email protected]

02-05-2015 02:27 AM

Grizzly Bandsaw G0555 - 22 replies

Got my new Grizzly G0555 bandsaw today. Was very excited about it. Seems solid, well built! fit and finish are good. Screwed it all together cut a few things, seems good. I was even surprised it came with a Cast iron table. First issue. You CAN NOT adjust the lower Blade bearing without taking off the Table. So if you have dialed everythi...

02-03-2015 01:33 PM

Question about Grizzly Disc Sander - 4 replies

I am considering buying a 12 inch Disc Sander from grizzly… http://www.grizzly.com/products/12-Disc-Sander/G7297 Does anyone have any experience with this machine?

02-01-2015 10:00 PM

That Feeling - 11 replies

Many years ago I use to get great satisfaction out of making wood projects thatI ran cross ran across too fast in my 20s. I liked what I did but never had a breath taking, stop in my tracks moment. On My current project I took my time on and paid attention, I found myself caressing every edge and curve of said project. Almost Like making...

01-28-2015 03:26 AM

Incra and Ridgid - 1 reply

I recently got a new Incra V-27 miter gauge to replace my hair splitting atomically accurate Ridgid Miter gauge. I also have retuned my entire R4512.. The blade is right on with the miter slot and the fence TO-WIT. SO when I adjusted my Incra for a perfect 90 degree cut the pre made 90 degree notch does not line up… Just slightly off 90...

« prev 1 2 3 next »
47 topics


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com