Greg's Blog

  • Advertise with us
This blog is written by Greg | 5 entries so far

Latest Entry

Stickley High Chest #5: Almost done

02-28-2011 09:04 PM by Greg | 6 comments »

This is the last entry in this series of blogs. My next post will be in the Projects post as the completed project. All that remains is sanding the top with lubricated 600 grit sand paper and installing some drawer stops. I did have a couple of set backs that I had to work through:1. The bottom drawer did not slide very well. The dovetailed drawer slide was binding when moving the drawer in and out. I had removed a little material from the part of the slide that attached to the dust frame so that the drawer would sit a little lower. I did this by chiseling off about a 1/16” from the front and back of the slide piece. I didn’t do too well chiseling by hand. The sl...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics