LumberJocks

GR8HUNTER's Forum Topics

  • Advertise with us
View GR8HUNTER's:homeworkshopprojects (58)blog (2)reviews (0)forum topics (71)buddies (131)favorites (89)activity logWatch
09-10-2021 04:37 PM

***NEVER FORGET*** - 17 replies

Tomorrow is 9/11 ..... 20 years after that awful day ….. PLEASE REMEMBER .. the lost souls that never made it home that day ......... :<)))))))) AMEN

08-04-2021 04:21 PM

JUST LOOKING FOR HELP - 121 replies

I am very sorry if i offend any1 by posting this here but my wife and i could really use everyone’s help in this time of need HELP TAMMY :<))

07-27-2021 02:18 PM

in search of WISDOM - 8 replies

As some might know my Wife has a stroke so i thought i could build her this to help with transfers from bed the wheelchair problem is it works to well. so now my question is there some way to add DRAG to this lazy suzan so its not so loose. :<)))))

02-22-2021 05:31 PM

PLEASE HELP ME - 30 replies

Quick short story my wife had a stroke now i find myself being a full time caregiver which leaves NO TIME for the shop which makes me very very sad :<(((((((( i was thinking of doing some sort of wood working here in the house in between me being a nurse was thinking of maybe carving so MY ? is if you could but only 1 carving tool what wou...

11-18-2020 03:21 PM

**HELP ME PICK** - 20 replies

Hello all I am in the market to get a battery chainsaw i have $300.00 to purchase it now before you post a video which i have watched 1000’s i want here what kind you have volts ,bar length ,what you like what you dont like about the one you own also if you could buy another one would you ? so far top of my list is dewalt :<))))))) THAN...

09-05-2020 02:12 PM

**VERY TIRED OF BREAKING BITS** - 13 replies

I am in the search for IMPACT Phillip’s bits that do not crumble when in use so i am putting these 2 questions here since i have good feeling s about this GR8 SITE :<)) 1 – Can someone recommend GR8 IMPACT PHILLLIPS BITS ? 2 – Could someone recommend a GR8 HOLDER for the bits as i get tired of after every screw that ...

08-16-2020 03:36 PM

**COUPLE GENERAL QUESTIONS** - 15 replies

I have been elected to make an outdoor sign for our church this sign will be along the main road with arrows pointing so both side need done as a mirror image size is 24 wide X 20 high it mounts on a 4X4 post it should be painted white with red letters 1 – What should material be 3/4” marine plywood … 3 cedar boards bisquit ...

08-07-2020 09:45 PM

SOME SHOP IMPROVMENTS - 15 replies

I had an OK router tableI was on the watch for a decent router lift and or table but i just dont use the router as much since it was a PIA to adjust it so when woodsmith offered free plans I ordered the router lift so with minimal parts and money i put it together counter top i got for free with plate and all i have around 100.00 in it all no it...

06-06-2020 12:51 AM

in search of - 5 replies

HELLO ALL , I am in need of THIS It is so you can use the smaller hole saws in the kit I googled it all day long cant seem to find one or does any1 have any other ideas that would work THANKS ALL :<))

05-10-2020 03:46 PM

MY NEW BANDSAW REVEIW* FROM DUD TO A STUD* - 7 replies

I wanted a second smaller bandsaw for cutting little wood parts so i did some research read reveiws pulled all my hair out and finally settled on THIS ONE WHILE I was already at Lowes I also purchased a 1/4” Bosch blade brought I home tuned it up put it together which was very easy BTW cut wood with it said this thing is a hunk of junk...

04-18-2020 12:14 AM

HELP WITH ELECTRIC SWITCH - 2 replies

Hello all Electricians and or people who know my question is right now I have my sanders set up on a I-VAC switch which comes on when sanders are started then runs vacuum some time after sander is shut off all 120voltsmy ? is can I do the same thing with my 120v dust collector and my 220v table saw I checked with I-VAC and they can not help me ...

04-18-2020 12:07 AM

THE NEW 2020 MODELS ARE IN AT TOYS AND JOYS - 3 replies

DOZER , CATTLE CAR , FORMULA 1 CAR :<(((

11-23-2019 02:49 PM

I THINK I NEED A NEW AIR COMPRESSOR - 12 replies

sorry if this is the wrong forum but i do think there is a safety issue here first let me say 20 years ago i bought a direct drive oilless 5 hp 26 gallon upright air compressor thing was a bear to drain after use so I put a street 90 on it then a long nipple then a ball valve to make it eiser to drain now I have air compressor in other shed wit...

11-16-2019 06:34 PM

2020SurpriseSwap - 2872 replies

Lady’s and Gents (used loosely),It’s time again for another swap. Keebler is finishing up the mallet swap now and we have all decided to move on to another. Unfortunately you will have to deal with me this time around Don’t worry, I will do a crappy job just so he has to come back!!! <kidding> In regular standing, I have completely ripped of...

11-06-2019 02:23 PM

**WHAT** - 6 replies

THIS ITEM SIMPLY BLEW MY MIND https://lancaster.craigslist.org/grd/d/idaville-stihl-026-circular-saw/7014384959.html :<))) HAVE A NICE DAY ALL

08-18-2019 06:05 PM

LUMBER MAKER - 5 replies

any one of you jocks ever heard of this mill ? https://lancaster.craigslist.org/tls/d/mohnton-lumber-maker-chain-saw-tool/6959129519.html looks interesting but wondering how well it works ? any one have this ? how does it work ? save my $50 for real lumber ? it is close to my house so gas money is nill what say all :<))))) ...

06-26-2019 09:45 PM

? ABOUT T&J #99 TRAIN - 11 replies

THIS QUESTION IS FOR THE GUYS WHO BUILT THE #99 WOOD BURNING TRAIN FROM TOYS ANS JOYS DOES THE MAIN TRAIN WHEELS NEED TO BE MOUNTED SEPERATLY OR A SET ON ONE AXLE ? ? ? CAUSE I JUST PUT IT TOGTHER AND THEY DID NOT WORK WELL :<((((

06-24-2019 01:34 PM

OMNI TOOL - 2 replies

this is very nice thought it would intrest some of you guys and gals and cheaper then the red one LOL http://omnitoolworks.com/ :<)))))

06-14-2019 03:06 PM

HELP WITH RED DYE - 21 replies

hello all … I have been commissioned to build this fire truck I would like it to have a red tint to wood with still being able to tell its wood so I googled it and now I’m more confused then ever …. dye stain , powder dye , water base ,or just use Paduak … so I am asking ?s 1- what is the best dye2- brand 3- what wood to us...

06-01-2019 11:44 PM

**UPDATE** 46-111 INDEKING PIN (BROKEN END) - 6 replies

I HAVE A 46-111 ROCKWELL LATHE AND THE TIP BROKE OFF THE INDEKING PIN SEE PICS I looked It up in my manual part number 434-01-071-0012I cannot find anywhere online :<((( so I’m left to try and fix this one I first thought I could grind it flat and epoxy a little shaft in there but the problem is it is very very close to the edge ...

1 2 3 4 next »
71 topics


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com