FloridaArt's Blog

  • Advertise with us
This blog is written by FloridaArt | 1 entry so far

Latest Entry

Business Card Box #1: Step-By-Step Instructions with Photos

03-22-2012 01:39 AM by FloridaArt | 13 comments »

March, 2012—I started making simple little wood boxes to hold business cards and small trinkets, like sea shells and thumb drives. After making about 30 of these I decided to break it down, take photos, and write step-by-step instructions. This would be a good project for beginners. Tools used: + Table Saw (10-inch blade thin kerf blade)+ Band Saw (3/16ths blade for tight curves, 10 TPI—teeth per inch)+ Power Miter Saw+ Router (3/8ths round-over bit)+ Belt Sander+ Palm Sander The Band Saw could substitute for the Table Saw and the Miter Saw. Hand sanding could replace the Belt and Palm Sanders. The Router could also be omitted, in favor of sharper edges. Step 1&#...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics