Eugd's Forum Topics

  • Advertise with us
View Eugd's:homeworkshopprojects (0)blog (0)reviews (0)forum topics (7)buddies (0)favorites (0)activity logWatch
10-09-2016 01:35 AM

Question about Hinges - 3 replies

I am building some 2 buti-ln’s in the dinning room on both sides of the breezeway. I’M up to the doors, the face frame varies due to caucus butting up to each other and a filler strip face frame. I am thinking about using 2 different overlays for about 1/2 for the middle section for where the two doors from 2 different cabinets will ...

10-02-2016 07:25 PM

First Box - 0 replies

I made this box for a friend who lost her mother recently. It was a good learning experience, made it out of scraps of maple and poplar for the top, I ended making a spline jig for it. I finished with arm and seal “Gloss”, I don’t know if I could of used trans tints dye to make the grain pop a bit but was under a time crunch ...

10-02-2016 06:41 PM

Bedroom Closet build. - 11 replies

I build this closet at the beginning of the year after demoing the 2 closets in the master bathroom to expand the bathroom from a 1/2 bathroom to a 10’ x 11’ bathroom, which is going to be my next home remodel when we get the budget to do it right. The closet has a clear coat of shellac on the inside and pollyac...

10-02-2016 06:06 PM

Ridgid 12" sliding miter saw fence not square. - 2 replies

I had the saw for about 2 years, and when I got it I made sure that the fence was square to the blade. I used it mostly for doing work around the house molding, casing and cutting down long pieces of wood to manageable sizes. most stuff was square enough for what I was doing. Well as my skills have improved, and learned more about woodworking I...

09-02-2016 05:20 PM

How would one do this through joint - 16 replies

My wife saw this and really liked it, I understand the basics of through mortises but I saw this and have no idea how they did this unless the sides are in two peices and glues back together along the long grain, and the mortise is done on a angle for the two halfs? Any feedback would be great appreciated.

08-07-2016 05:50 PM

Dust Collection separation drum question - 3 replies

My previous post was difficultly with the upper bag not inflating properly since my cleaned out my shop fox 1.5 horsepower dust collection. since then I decided just bite the bullet and buy a Wynn filter canister. I also bought the rocket dust collection 4 inch kit to hook up to a 30 gallon plastic drum that has a metal locking hinge. Today I ...

07-14-2016 04:26 PM

Question about shop fox 1.5 hp dust collector - 9 replies

I recently purchased the unit and did my first emptying of the debris bag and the top bag, I have the 2 Micron bag, I made sure I shook out the top bag thoroughly. since my emptying, the top bag unit doesn’t inflate barely at all, it used to inflate fully now no moment I start the unit now it doesn’t fully however I feel that ...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics