LumberJocks

Garage Overhaul #4: Rule number (not sure anymore) - Garage floors are not flat.

  • Advertise with us
Blog entry by Emanon posted 11-19-2020 08:24 PM 293 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 3: Lesson 3 – The place I end up usually is not where I thought I would be when I started. Part 4 of Garage Overhaul series Part 5: Rule - Fall down seven times and stand up eight. »

So I begin my build of my module/mobile work table. I decided nothing fancy for this, just build it and get to work on it.
Cut the 2×4s with the new cross cut sled. That thing worked great.
I laid out the 2×4s on the floor. While using a square, I attached (as best I could) all the boards together using wood screws. After that I attached the wheels on the bottom, flipped it over and

(I used to have a wonderful German Shepherd that sometime would cock his head to one side when he did not understand something. This is what I did when I )

watched it slow head towards the garage door.

I figured this was a sign that I needed a break.



1 comment so far

View BlueRidgeDog's profile

BlueRidgeDog

740 posts in 695 days


#1 posted 11-20-2020 04:00 PM

Yea, they be like that. I don’t have a furniture grade level space in my shop. I am planning on building a level platform so I can fine tune legs/etc versus waiting to do it onsite.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com