Does anyone know where I can get a plan for a very simple rubber band gun? I have seen plans online, but they are all complicated, lengthily builds. I want something that can be done quickly without a lot of time building them. I will need 11 guns for a customer with 11 nieces and nephews. I am hoping to find something that will hold 3 or more bands at a time, not a gun that loads and shoots only 1 at a time.
-- Eloyd
6 comments so far
americancanuck
home | projects | blog
461 posts in 3580 days
#1 posted 02-12-2020 01:08 PM
Haven’t you heard about the new gun law that bans these things haha
-- Retired and lovin it
jeffswildwood
home | projects | blog
4797 posts in 2947 days
#2 posted 02-12-2020 01:20 PM
I don’t know of any plans but my Sons had some years ago. They were plastic but if you can find one, reverse engineer it.
-- We all make mistakes, the trick is to fix it in a way that says "I meant to do that".
Knappen
home | projects | blog
68 posts in 2876 days
#3 posted 02-12-2020 01:58 PM
You can try this:
https://www.rbguns.com
-- Knappen aka Ole - I have to try everything at least once. http://oknap.dk/pg
Foghorn
home | projects | blog
918 posts in 357 days
#4 posted 02-12-2020 08:02 PM
That 3 shot, step action one looks reasonably easy to make. Even has the instructions on how to do it. Thanks for that even though I wasn’t the OP.
-- Darrel
LittleBlackDuck
home | projects | blog
6178 posts in 1791 days
#5 posted 02-13-2020 06:18 AM
Ditto and double thanks Knapers… appreciated!
-- If your first cut is too short... Take the second cut from the longer end... LBD
robscastle
home | projects | blog
7659 posts in 3174 days
#6 posted 02-14-2020 02:49 AM
Have a look here Eloyd,
https://www.lumberjocks.com/anthm27/blog/128745
-- Regards Rob
Have your say...