LumberJocks

Router Fence

  • Advertise with us
Blog series by EdsCustomWoodCrafts updated 11-18-2014 12:59 AM 3 parts 4660 reads 0 comments total

Part 1: The Router Fence (Part 1)

11-17-2014 03:56 AM by EdsCustomWoodCrafts | 0 comments »

The faceplate of the fence has an upper mini track so as that I can put accessories if the need ever arises like stop blocks and feather boards My fence is a L frame secures with pocket hole screws and glue I will also be supporting the L frame with gussets. the bottom panel slides on a mini track that is tightened by the red knobs.. the depth of the mini track is so as that it can reach the router hole…... I will be putting sliding bearing braces to vary the clearance ope...

Read this entry »


Part 2: Router Fence (Part 2)

11-17-2014 04:00 AM by EdsCustomWoodCrafts | 0 comments »

Here is a behind the scenes look at the fence… as you can see the gussetts I was talking about I pocket screwed them into the face and underscrewed the bottoms from beneath the baseplate of the fence.. I also installed a receiving port for my wet/dry vac.. I will enclose this later ..

Read this entry »


Part 3: Router Fence Completed

11-18-2014 12:59 AM by EdsCustomWoodCrafts | 0 comments »

Well the fence is completed and not without its errors.. when assembling the outer adjustable faces I never compensated the distance between the knobs that I was using and the base that was already installed…ohh well .. In hindsight I should have put the sliding track up higher on the adjustable outer faces and everything would be fine… never the less I put my thinking cap on and solved the problem…

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com