Cedar Cooler Box #7: Cooler wall part 2: Right side

  • Advertise with us
Blog entry by EdsCustomWoodCrafts posted 05-06-2015 12:20 AM 1438 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 6: Cooler Wall Part 1( front wall) Part 7 of Cedar Cooler Box series Part 8: Wall Panel : Part 3 »

All the panels are made and constructed with the same dimensions the only difference is the number of boards needed, since the sides are narrower than the front panels…

Step 1: cut 4 pieces of 3.5” @ 13.5” length
Step 2: run all panels through the router table using a 45° chamfer bit to define the panel further as seen in pic below
Step 3: pocket screw as before
Step 4: attach panel using pocket screws and 1” screws into the side stretchers

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics