Cookbook Stand #4: The Stand

  • Advertise with us
Blog entry by EdsCustomWoodCrafts posted 02-08-2015 02:08 AM 987 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 3: Cookbook Lip Part 4 of Cookbook Stand series no next part

In the final construction phase of the project its time to put the stand on the back so as that it will stand upright but tilt just a little to make it easy to see what your looking at…

All I used in this is 2” brass hinge , 2.5” x .5” pine board leftover from the lip and a little bit of cord…

One more thing that I put on was 1.5” piece on the back of the stand at the bottom to reinforce the L and to be honest the board I used developed a little belly in it and I used it to conceal the gap that it created…. you don’t necessarily need to put this on…...

See the completed project here:

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics