Benchtop Bench & Vise #7: Vise Components

  • Advertise with us
Blog entry by EdsCustomWoodCrafts posted 01-12-2018 10:59 PM 860 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 6: Wide Stretchers & Completed Base Part 7 of Benchtop Bench & Vise series Part 8: Top »

The vise is made up off double up 1×4 solid oak boards that I glued together to form the inside and external vise components…

I had to carefully place 3/4” holes to receive the black pipe that will be used to tighten and loosen the vise jaws.

After the oak components dried up I placed some dog holes in the top so as that I could use the vise to clamp pieces especially since this was the reason for the build.

All that was left is making the top

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics