Benchtop Bench & Vise #2: Budget & Materials for Project

  • Advertise with us
Blog entry by EdsCustomWoodCrafts posted 01-12-2018 06:04 PM 1683 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 1: Inspiration Part 2 of Benchtop Bench & Vise series Part 3: Sketchup Design »

I gave myself a budget of about $80.00 for what materials I needed which are detailed below and since I already had alot of material on hand already like the pipe clamps and 2×4’s all I needed to get was the solid oak and benchdogs.

Materials Used:

(4) 2×4x 8’
(16’) of 1×2 Oak
(8’) of 1×4 Oak
1/4” x 4” Hex Head bolts , washers and nuts
Bench Dogs ( I used these from WoodCraft)

“1/2 Pipe Clamps ( I had these on hand so I didnt need them but I ive attached a link as there what I used in the model)

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics