Kitchen Island Cart #5: Dry assembly of Back and sides

  • Advertise with us
Blog entry by EdsCustomWoodCrafts posted 09-27-2017 04:19 AM 1038 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 4: Back Panel Part 5 of Kitchen Island Cart series Part 6: The Base »

These 2 pictures just show me doing a test run on clamping up everything and squaring the mating pieces.. I made a couple of right angle clamps with holes in them and they kept everything nice and square

In this picture I placed the front stretcher for a couple of reason I want to keep the front square to the back and the stretcher defines the 2 drawers that I will be putting in later on.

I receded the stretcher so that it was flush with front frame so I used my chisels to achieve that

A closer look at the front recessed stretcher.. I held this in with glue

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics