Router Cabinet Redo #7: Adding a plywood plate to attach My router table

  • Advertise with us
Blog entry by EdsCustomWoodCrafts posted 03-02-2017 05:47 PM 668 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 6: Securing Front Stretcher Part 7 of Router Cabinet Redo series Part 8: Adding 3" Rotating and Lockable Casters »

This is a very simple process ..

All this step does is gives a point of contact for the cabinet to meet the Kreg Router Table

It’s basically 2 pieces of 3/4” plywood placed on the left and right sides of the cabinet .. I predrilled holes underneath these panels to screw 4 screws into each side of the router table ..

It was imperative that the panel was flush on all sides of the side and back panels or the router table wouldn’t be level

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics