LumberJocks

ERQ's Blog

  • Advertise with us
This blog is written by ERQ | 4 entries so far

Latest Entry

Grizzly G0452P Jointer Set-Up #4: Serious Fence Issue

07-19-2015 07:25 PM by ERQ | 5 comments »

When assembling the fence for the jointer, you need to place the fence on the table in order to have clearance to insert and tighten the screws holding the fence bracket to the fench carriage that rides on the “ram” (the rack-and-pinion steel post): I noticed upon installing the fence, that there was a lot of play in the fence, but that the default position it wanted to settle at was with pretty uneven gaps at the infeed table side vs the outfeed table side, even with the infeed table set dead flat with the outfeed. I also had left the wax paper on both the tables and the fence to protect them somewhat during the assembly. Obviously I had to crank the fence back off the...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com