| Blog series by Dutchy | updated 01-01-2020 10:01 AM | 6 parts | 7575 reads | 20 comments total |
Part 1: Clamp modification
Now I,m retired there is more time to reorganize my shop. Ten years ago I made my shop set up. From time to time bought some stuff and reorganisation was more than necessary. One of the things I did was making a bench you could see at https://woodworkingweb.com/creations/848-mftc-multi-function-tool-cart-or-mobile-workbench In this blog series I want to show some modifications and some things I made the last time. I bought a very cheap clamp (Euro 1,95) and changed it to use as a festoo...
Part 2: (second) Clamp modification
I modified a second clamp. This time for the top of the MFTC. It isn,t the most beautiful one, but it works well. First I made a wood block on the top of the rod and a wood block on the clamp: Here you can see how it is set: After the modification: I was forgotten to tell that I first did some band saw work:
Part 3: Is my shop to small or do I have to many tools?
Is my shop to small or do I have to many tools? It,s up to you. For the small machines I have thought making flipover stands, but on one stand I could put two, maybe three, machines on it. After thinking and trying I came to a solution and put five machines on a small bench. I can use all five without a lot of change. Overvieuw: Drawers for drills and so on: Drill table hanging on the left side: Drill press with mounted table: On the back a flexible drilling shaft and also p...
Part 4: A industrial preparation
Changed url https://www.lumberjocks.com/Dutchy/blog/130470
Part 6: Pavement and floor paneling
Changed url https://www.lumberjocks.com/Dutchy/blog/130472
