LumberJocks

Forklift

  • Advertise with us
Blog series by Dutchy updated 03-15-2020 03:56 PM 25 parts 6904 reads 60 comments total

Part 1: Preliminary

02-02-2020 04:53 PM by Dutchy | 6 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6 ...

Read this entry »


Part 2: The base

02-09-2020 09:00 AM by Dutchy | 7 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6 ...

Read this entry »


Part 3: Rear axle

02-18-2020 06:51 PM by Dutchy | 6 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6 ...

Read this entry »


Part 4: Engine

02-18-2020 07:36 PM by Dutchy | 3 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6

Read this entry »


Part 5: Engine sides

02-20-2020 06:03 PM by Dutchy | 3 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6 ...

Read this entry »


Part 6: More engine parts

02-20-2020 06:36 PM by Dutchy | 2 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information

Read this entry »


Part 7: Rear parts

02-23-2020 11:51 AM by Dutchy | 0 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6 ...

Read this entry »


Part 8: Cab base

02-23-2020 03:22 PM by Dutchy | 1 comment »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6 ...

Read this entry »


Part 9: Dash

02-23-2020 03:47 PM by Dutchy | 2 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6 ...

Read this entry »


Part 10: Seat

02-23-2020 09:05 PM by Dutchy | 2 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6 ...

Read this entry »


Part 11: Front fenders

03-07-2020 07:28 PM by Dutchy | 1 comment »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6

Read this entry »


Part 12: Hydraulic cylinders

03-07-2020 07:49 PM by Dutchy | 6 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6 ...

Read this entry »


Part 13: Roof

03-07-2020 07:57 PM by Dutchy | 0 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6 ...

Read this entry »


Part 14: Cab

03-07-2020 08:44 PM by Dutchy | 1 comment »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6

Read this entry »


Part 15: Assembling

03-08-2020 08:43 PM by Dutchy | 1 comment »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6 ...

Read this entry »


Part 16: Wheels

03-15-2020 08:54 AM by Dutchy | 1 comment »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6 ...

Read this entry »


Part 17: Steering system

03-15-2020 09:00 AM by Dutchy | 4 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6

Read this entry »


Part 18: Small parts

03-15-2020 01:03 PM by Dutchy | 0 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6

Read this entry »


Part 19: Outer mast

03-15-2020 01:07 PM by Dutchy | 0 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6 ...

Read this entry »


Part 20: Inner mast

03-15-2020 02:00 PM by Dutchy | 0 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information

Read this entry »


Part 21: Mast slide unit

03-15-2020 02:06 PM by Dutchy | 1 comment »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information 6 ...

Read this entry »


Part 22: Forks

03-15-2020 02:18 PM by Dutchy | 0 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information

Read this entry »


Part 23: Marriage

03-15-2020 02:19 PM by Dutchy | 2 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information

Read this entry »


Part 24: Mistakes

03-15-2020 03:54 PM by Dutchy | 2 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information

Read this entry »


Part 25: In which I deviated from the drawing

03-15-2020 03:56 PM by Dutchy | 9 comments »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result. Interested in making this forklift yourself? Go to my site for more information

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com