LumberJocks

Army truck #16: Fuel tanks

  • Advertise with us
Blog entry by Dutchy posted 07-12-2020 11:50 AM 364 reads 0 times favorited 3 comments Add to Favorites Watch
« Part 15: Rear fenders Part 16 of Army truck series no next part

This is a serie about making a army truck the same as GR8hunter did. The sequence of photos will be gronological, with doeing this I hope to make my working method more clear. This means that the order is not corresponding the drawing chapters.

Comments are welcome!

If you want to make this Army truck by yourself plans are available at: https://dutchypatterns.com/pattern/army-truck/
.
.

.
.
.

6

-- https://dutchypatterns.com/



3 comments so far

View sras's profile

sras

5535 posts in 3934 days


#1 posted 07-12-2020 03:37 PM

You’re making good progress!

-- Steve - Impatience is Expensive

View LittleBlackDuck's profile

LittleBlackDuck

4992 posts in 1626 days


#2 posted 07-12-2020 11:53 PM


What colour paint do you need?... can any colour be used? Could I use a non-dribbling can… or even unopened?

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Dutchy's profile

Dutchy

3774 posts in 2973 days


#3 posted 07-13-2020 06:09 AM




What colour paint do you need?... can any colour be used? Could I use a non-dribbling can… or even unopened?

- LittleBlackDuck

Unopened is the best (then you know for sure that it contains the most) and I have noticed that white works best simply because I have never tried other colors.

-- https://dutchypatterns.com/

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com