LumberJocks

Forklift #12: Hydraulic cylinders

  • Advertise with us
Blog entry by Dutchy posted 03-07-2020 07:49 PM 512 reads 0 times favorited 6 comments Add to Favorites Watch
« Part 11: Front fenders Part 12 of Forklift series Part 13: Roof »

After I made a plan for a forklift it was time to build my own. This blog is about the build process. Beaware that the way I build my models are not the only one. I’m sure that in a lot of situations there are better ones! For that reason comments with orther techniques are more than welcome. Thanks to the work of SouthavenToyMaker you already can see the end result.

Interested in making this forklift yourself? Go to my site for more information


6

11

16

-- https://dutchypatterns.com/



6 comments so far

View LittleBlackDuck's profile

LittleBlackDuck

7076 posts in 1907 days


#1 posted 03-07-2020 11:03 PM

Does that mean I have to read this blog twice? Thanks Dutchy... you know I hate reading!

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Pjonesy's profile

Pjonesy

408 posts in 1912 days


#2 posted 03-08-2020 04:00 AM

Well done Dutchy I thought I was the only one who made two things then realised I should have made 4.

-- Don't tell me it can't be done.

View LittleBlackDuck's profile

LittleBlackDuck

7076 posts in 1907 days


#3 posted 03-08-2020 08:11 AM



Well done Dutchy I thought I was the only one who made two things then realised I should have made 4.
- Pjonesy

That’s how bigamy was invented!

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Dutchy's profile

Dutchy

4103 posts in 3255 days


#4 posted 03-08-2020 08:33 AM


Well done Dutchy I thought I was the only one who made two things then realised I should have made 4.
- Pjonesy

That s how bigamy was invented!

- LittleBlackDuck

I had a considerable fine from the government for making these cylinders in two stages

-- https://dutchypatterns.com/

View htl's profile

htl

5437 posts in 2245 days


#5 posted 03-12-2020 12:19 AM



Well done Dutchy I thought I was the only one who made two things then realised I should have made 4.

- Pjonesy

Yep!!! That’s right up there with the making if two left sides.
Great work and how2 non the less!!!

-- An Index Of My Model making Blogs https://www.lumberjocks.com/htl/blog/130264

View robscastle's profile

robscastle

7880 posts in 3290 days


#6 posted 03-14-2020 05:32 AM

forking hell Dutchy thats a good job!

-- Regards Rob

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com