LumberJocks

The new shed #11: Inside

  • Advertise with us
Blog entry by Dutchy posted 01-05-2020 01:26 PM 438 reads 0 times favorited 10 comments Add to Favorites Watch
« Part 10: Cabinet Part 11 of The new shed series Part 12: My 5 in 1 »

Beginning of 2019 I started with building a new shed, located in my backyard. With all the pictures in this blog you get an overview of the work. As always I will use few words and if you have questions feel free to ask.

6

10

15

-- https://dutchypatterns.com/



10 comments so far

View GR8HUNTER's profile

GR8HUNTER

6941 posts in 1343 days


#1 posted 01-05-2020 03:13 PM

what material is your flat spot in your workbench ?

also i did not see a table saw ? :<((

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View Dutchy's profile

Dutchy

3535 posts in 2799 days


#2 posted 01-05-2020 03:35 PM



what material is your flat spot in your workbench ?

- GR8HUNTER

Natural stone

also i did not see a table saw ? :<((

- GR8HUNTER

Next episode

-- https://dutchypatterns.com/

View Redoak49's profile

Redoak49

4403 posts in 2619 days


#3 posted 01-05-2020 03:39 PM

You dad a great job and have a excellent shop.

View BlueRidgeDog's profile

BlueRidgeDog

629 posts in 410 days


#4 posted 01-05-2020 03:51 PM

What do you principally make such that you need a flat reference surface? Is it for sharpening? I from time to time need such a surface for metal work, but in my wood working I have not needed one. Also, it looks like a single to three phase VFD on the wall. What is it running as all the tools I can see look like they are single phase.

View Dutchy's profile

Dutchy

3535 posts in 2799 days


#5 posted 01-05-2020 04:14 PM



What do you principally make such that you need a flat reference surface? Is it for sharpening? I from time to time need such a surface for metal work, but in my wood working I have not needed one.
- BlueRidgeDog

I had two of this natural stones, and had the choice to throw both away or throw one away and use one in my bench. I did the last. Sometimes I do some metal working and a flat spot can be handy for sanding.

Also, it looks like a single to three phase VFD on the wall. What is it running as all the tools I can see look like they are single phase.

- BlueRidgeDog

It is all single phase, total 16A, about 230-240V. My lathe has a 1.5 Kwh, 750 rpm, 3 phase moter. Even at a very low speed there is a lot of force. Also my 5 in 1 cobination has 3 3phase motors. The 5-1 has yet to be moved. (Next episode)

The motors of the combination machine are 3Kwh and the dust collection is 1,5Kwh. In total 4,5 Kwh. This is more than the 16A fuse I have, but when I don’t start both at the same time I never have had any problem, symply because they never use the full power.

-- https://dutchypatterns.com/

View Dutchy's profile

Dutchy

3535 posts in 2799 days


#6 posted 01-05-2020 04:15 PM



You dad a great job and have a excellent shop.

- Redoak49

Thanks

-- https://dutchypatterns.com/

View robscastle's profile (online now)

robscastle

6734 posts in 2835 days


#7 posted 01-05-2020 10:19 PM

OMG I should never have looked!

Nicely done I must say!!

-- Regards Rob

View stefang's profile

stefang

17039 posts in 3965 days


#8 posted 01-06-2020 06:51 PM

Your shop looks very neat and well organized. I’m sure you will spend many pleasurable hours there. A very successful build!

-- Mike, an American living in Norway.

View htl's profile

htl

4908 posts in 1790 days


#9 posted 01-19-2020 10:39 PM

That’s one great looking shop you’ve been putting together over the last year.
Love the way you boxed up the cyclone to keep it quiet and every thing on wheels so you can get it out when needed but back in it’s place and out of the way when not.

-- An Index Of My Model making Blogs https://www.lumberjocks.com/htl/blog/130264

View crowie's profile

crowie

3425 posts in 2581 days


#10 posted 01-21-2020 06:17 AM

That looks super well organized, so neat and clean Jan.
Well done and enjoy making mess in it as well as some beautiful creations.

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com