LumberJocks

The new shed #9: The door

  • Advertise with us
Blog entry by Dutchy posted 01-02-2020 08:52 PM 343 reads 0 times favorited 10 comments Add to Favorites Watch
« Part 8: Outside Part 9 of The new shed series Part 10: Cabinet »

Beginning of 2019 I started with building a new shed, located in my backyard. With all the pictures in this blog you get an overview of the work. As always I will use few words and if you have questions feel free to ask.

6

-- https://dutchypatterns.com/



10 comments so far

View FirehouseWoodworking's profile

FirehouseWoodworking

768 posts in 3904 days


#1 posted 01-02-2020 09:41 PM

I really like that! WELL DONE!

You may want to consider a couple of horizontal battens on the inside to maintain the plane of the door. Otherwise, over time, the natural movement of the door may cause wiggling of the parts and eventually lead to failure of the screw at the joint.

Just a thought.

Cheers!

-- Dave; Lansing, Kansas

View GR8HUNTER's profile

GR8HUNTER

6941 posts in 1343 days


#2 posted 01-02-2020 09:50 PM

looks like a door of a bank vault thick LOL :<)))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View Dutchy's profile

Dutchy

3535 posts in 2799 days


#3 posted 01-02-2020 09:56 PM



I really like that! WELL DONE!

You may want to consider a couple of horizontal battens on the inside to maintain the plane of the door. Otherwise, over time, the natural movement of the door may cause wiggling of the parts and eventually lead to failure of the screw at the joint.

Just a thought.

Cheers!

- FirehouseWoodworking

Thanks!

-- https://dutchypatterns.com/

View LittleBlackDuck's profile (online now)

LittleBlackDuck

3662 posts in 1451 days


#4 posted 01-02-2020 11:28 PM

Is it voice activated???

-- If your first cut is too short... Take the second cut from the longer end... LBD

View robscastle's profile (online now)

robscastle

6734 posts in 2835 days


#5 posted 01-03-2020 06:10 AM

OK I think its,
PIR
Polyethylene insulated ….something or other
Its definatey not Passive Infra Red

Now the door.
1. if its electric what are the keys for please?
2. Is it really 20cm thick? that’s about 8” Dutchy wow man that’s scary! ... did you model it on anything!
I remember seeing windows in Russia similar but I am sure they were not that thick, they actually wedged shut

I hope its not Open Sesame

-- Regards Rob

View Dutchy's profile

Dutchy

3535 posts in 2799 days


#6 posted 01-03-2020 08:22 AM



OK I think its,
PIR
Polyethylene insulated ….something or other
Its definatey not Passive Infra Red

- robscastle

The PIR I used are leftovers from a SIP paneling factory. SIP is a house building method and on UouTube there are a lot videos about it. SIPs can be made with PS or PUR or PIR. PIR ihas a higher isolation than PUR. More about the differents you can find at: https://www.bauderfoam.com/en/bauderfoam/difference-between-pur-pir.html

For a good understanding: My shed is not build according the SIP method. It’s tradional framing filled with the SIP panel leftovers.

-- https://dutchypatterns.com/

View LittleBlackDuck's profile (online now)

LittleBlackDuck

3662 posts in 1451 days


#7 posted 01-03-2020 11:22 AM

OK I think its,
PIR
Polyethylene insulated ….something or other
Its definatey not Passive Infra Red

- robscastle

The PIR I used are leftovers from a SIP paneling factory. SIP is a house building method and on UouTube there are a lot videos about it. SIPs can be made with PS or PUR or PIR. PIR ihas a higher isolation than PUR. More about the differents you can find at: https://www.bauderfoam.com/en/bauderfoam/difference-between-pur-pir.html

For a good understanding: My shed is not build according the SIP method. It s tradional framing filled with the SIP panel leftovers.

- Dutchy

Love the banter and education, gents… but, wouldn’t it be easier to say it’s made out of wood?

-- If your first cut is too short... Take the second cut from the longer end... LBD

View htl's profile

htl

4908 posts in 1790 days


#8 posted 01-03-2020 06:52 PM

WOW!!!
You’ve sure put a ton a work into your new shop and can tell it will fit you to a tee.
Looking forward to seeing all the great projects you come up with in the shop and for it.

-- An Index Of My Model making Blogs https://www.lumberjocks.com/htl/blog/130264

View stefang's profile

stefang

17039 posts in 3965 days


#9 posted 01-06-2020 06:34 PM

Wonderful job on the door. I am also wondering how the lock works.

-- Mike, an American living in Norway.

View Dutchy's profile

Dutchy

3535 posts in 2799 days


#10 posted 01-06-2020 07:30 PM



Wonderful job on the door. I am also wondering how the lock works.

- stefang

Difficult for me to explain, but compare it with a dooropening system like there are in a apartment buildings.

-- https://dutchypatterns.com/

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com