LumberJocks

Buick sedan 1932 #9: Cabin sides, chapter 6 from the plan.

  • Advertise with us
Blog entry by Dutchy posted 02-10-2019 06:24 PM 854 reads 0 times favorited 12 comments Add to Favorites Watch
« Part 8: Seats, chapter 5 from the plan. Part 9 of Buick sedan 1932 series Part 10: Cabin rear side, chapter 7 from the plan. »

During making the Buick Sedan I have made a lot of pictures and they will be used for this blog about the build process. This blog is mostly made in subdivisions according to the chapters of the building plan, but be aware that this is not the same as the chronological build. When questions are there feel free to ask. If I don’t know the answer there are a lot more LJ members which can and will help you.

There are many ways to build a wooden model and mine isn’t the best. Sometimes I have to redo it more often than I like. It also happens that after something is done I realize that there was a better way. And therefor feel free to comment when you think It can be done different or better.

x

6

11


16

21

x

-- https://dutchypatterns.com/



12 comments so far

View ralbuck's profile

ralbuck

5899 posts in 2594 days


#1 posted 02-10-2019 06:37 PM

A great model.

BUT a FANTASTIC amount of WORK!

-- Wood rescue is good for the environment and me! just rjR

View stefang's profile

stefang

16662 posts in 3661 days


#2 posted 02-10-2019 06:50 PM

Very precise and clean work, the kind we all strive after.

-- Mike, an American living in Norway.

View htl's profile

htl

4595 posts in 1487 days


#3 posted 02-10-2019 08:19 PM

Very nicely done!!!
But I’m so confused, I would think the green drill bit would go with the green patterns the purple with the purple patterns, I need to recheck my plan menu for this???

-- An Index Of My Model making Blogs http://lumberjocks.com/htl/blog/116729

View Dutchy's profile

Dutchy

3334 posts in 2496 days


#4 posted 02-10-2019 08:26 PM


Very nicely done!!!
But I m so confused, I would think the green drill bit would go with the green patterns the purple with the purple patterns, I need to recheck my plan menu for this???

- htl

It is easier as you thought. It is color by color.

-- https://dutchypatterns.com/

View Redoak49's profile

Redoak49

3878 posts in 2316 days


#5 posted 02-10-2019 09:30 PM

Well done blog with good pictures and explanation.

View htl's profile

htl

4595 posts in 1487 days


#6 posted 02-10-2019 10:18 PM

Sorry Dutchy just having a little fun with your wonderful blog, just hope I can cut some wood for it shortly!!!
My cabinet shop buddy says he’s got some walnut scrapes for me. COOL!!!
Sounds like a plan coming together. :-]

-- An Index Of My Model making Blogs http://lumberjocks.com/htl/blog/116729

View LittleBlackDuck's profile

LittleBlackDuck

2343 posts in 1148 days


#7 posted 02-12-2019 03:00 AM

Again I remain inspired!

Dutchy, I think this has answered an unswered question from a previous blog,

While I don’t have a milling machine, I hope I can emulate one with my 5,000rpm drill press and my sop built “milling table”.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Dutchy's profile

Dutchy

3334 posts in 2496 days


#8 posted 02-12-2019 07:28 AM



Again I remain inspired!

Dutchy, I think this has answered an unswered question from a previous blog,

- LittleBlackDuck

Yes it is.


Again I remain inspired!

While I don t have a milling machine, I hope I can emulate one with my 5,000rpm drill press and my sop built “milling table”.

- LittleBlackDuck

It is easier to do it with a groove saw on a table saw, isn’t it, or by hand with a small gouge. I’m enthusiastic about the Wabeco stand and that was the reason to show making the grooves with it.

-- https://dutchypatterns.com/

View LittleBlackDuck's profile

LittleBlackDuck

2343 posts in 1148 days


#9 posted 02-12-2019 08:21 AM


It is easier to do it with a groove saw on a table saw….

- Dutchy


For through cuts, yes… bit harder for stopped cuts.

..... or by hand with a small gouge….
- Dutchy

If you don’t drink vino and have a steady hand!

-- If your first cut is too short... Take the second cut from the longer end... LBD

View htl's profile

htl

4595 posts in 1487 days


#10 posted 02-12-2019 07:51 PM

Dutchy the more you use it the better you’ll get.
It’s always good to see other ways things can be done, it opens up new avenues to attack a problem.

-- An Index Of My Model making Blogs http://lumberjocks.com/htl/blog/116729

View Dutchy's profile

Dutchy

3334 posts in 2496 days


#11 posted 02-12-2019 08:45 PM

..... or by hand with a small gouge….
- Dutchy

If you don t drink vino and have a steady hand!

- LittleBlackDuck

Didn’t you missed my how to make kerfs with a ruler and gauge for vino drinkers?

-- https://dutchypatterns.com/

View crowie's profile

crowie

2974 posts in 2278 days


#12 posted 03-04-2019 01:01 AM

All of these parts are so small, my big mits would have trouble doing it…
Nicely done Dutchy!

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com