LumberJocks

Fordson super dexta wooden model #27: Fenders, chapter 19

  • Advertise with us
Blog entry by Dutchy posted 07-28-2017 07:43 PM 1748 reads 0 times favorited 10 comments Add to Favorites Watch
« Part 26: Rear axle, chapter 18. Part 27 of Fordson super dexta wooden model series Part 28: Hydraulic controle unit, chapter 20 »

Pictures below are from the making of the fenders of the Fordson Dexta.

The last time I made the fenders on the lathe, but this time I would make them without a lathe and did it on the router table.


5

10

15

20

25

30

35

Thanks for watching

-- https://dutchypatterns.com/



10 comments so far

View htl's profile

htl

4705 posts in 1575 days


#1 posted 07-28-2017 08:38 PM

Really nice work!!!
I think you’ve got the making if mini mallets down pat!!!

-- An Index Of My Model making Blogs http://lumberjocks.com/htl/blog/116729

View Redoak49's profile

Redoak49

4035 posts in 2404 days


#2 posted 07-28-2017 11:43 PM

I am amazed every time I read one of your blogs. Thanks for posting them.

View htl's profile

htl

4705 posts in 1575 days


#3 posted 07-28-2017 11:46 PM

I all so really liked you use of a jig to get the fenders shaped.

-- An Index Of My Model making Blogs http://lumberjocks.com/htl/blog/116729

View LittleBlackDuck's profile

LittleBlackDuck

2854 posts in 1236 days


#4 posted 07-29-2017 12:40 AM

Darn Dutchy, It’s not the tools but how you use them that continues to amaze me!

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Dutchy's profile

Dutchy

3390 posts in 2584 days


#5 posted 07-29-2017 06:44 AM


Really nice work!!!
I think you ve got the making if mini mallets down pat!!!

- htl

Did you see that the woodgrain was wrong? Later I have made two new one with correct orientation.

Mallets for a gnome? Who knows?

-- https://dutchypatterns.com/

View Dutchy's profile

Dutchy

3390 posts in 2584 days


#6 posted 07-29-2017 06:46 AM



Darn Dutchy, It s not the tools but how you use them that continues to amaze me!

- LittleBlackDuck

I like it to amaze you. You are always amaze me with how you use the SU tools.

-- https://dutchypatterns.com/

View Dutchy's profile

Dutchy

3390 posts in 2584 days


#7 posted 07-29-2017 06:48 AM



I am amazed every time I read one of your blogs. Thanks for posting them.

- Redoak49

Amazing Ducky and amazing you that’s amazing me.

-- https://dutchypatterns.com/

View bj383ss's profile

bj383ss

194 posts in 2777 days


#8 posted 07-29-2017 12:42 PM

Fantastic write up and ingenuity in making the small parts look the real deal. Love how you used the router bits to make the curves.

Bret

-- https://www.flickr.com/photos/[email protected]/

View Dee1's profile

Dee1

329 posts in 2305 days


#9 posted 07-29-2017 12:56 PM

Your Blogs are always just great but you simply amazed me with the fender jig on the router table
Well Done my man .
Dee1

View crowie's profile

crowie

3097 posts in 2367 days


#10 posted 07-31-2017 09:58 PM

My head hurts just looking through your blog Dutch… certainly a detailed “how to”.... thank you

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com