LumberJocks

Humidor build

  • Advertise with us
Blog series by Drew Gregory updated 07-06-2016 08:54 PM 3 parts 5320 reads 6 comments total

Part 1: Building my first humidor #2

06-29-2016 06:46 PM by Drew Gregory | 3 comments »

A little progress update here. I lined the box with spanish cedar, starting with the bottom then the walls and finally the lid. I’m quite happy with how it turned out all pieces are a tight fit and held in place with a couple dots of epoxy. After getting the box lined I fine tuned the fit using my no.5 1/2 which worked really well, better than expected. Time to get the lid attached, thanks to some excellent advice: Well, she s looking good so far! A couple of tips in de...

Read this entry »


Part 2: Building my first humidor #1

06-28-2016 02:44 AM by Drew Gregory | 2 comments »

A friend asked me to make a humidor for him after seeing some of my other projects. Having never made one, of course I said yes.Started off with a simple rabbit joint for the box frame. Added some maple trim on the corners and brought it down flush with my no.5 1/2 Added a walnut ply in a rabbit to the top and bottom Next up the top and bottom caps at 3/8” thick This walnut crotch is from a 4/4 chunk that I book matched to give it a subtle nod to a tobacc...

Read this entry »


Part 3: -Finish

07-06-2016 08:54 PM by Drew Gregory | 1 comment »

So far this project has been an excellent learning process, when it came time to finishing that was no exception. The client was looking for a “super glossy” look to the box. I decided to use a tung oil from Lee valley. The process was very simple. The lid to the humidor has some very fine figure to it so I wont up sanding it to 800 grit to remove all sanding marks. The rest of the box I sanded to 500 grit. I applied a thick first coat and let it soak in for about 10 minu...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com